Chris Earle (CBL) wrote:
Hi all,
haven't seen many posts about asterisk in Singapore...
Getting a server going there and was wondering if TDM400Ps will be fine in
FCC mode, and if there are indications / cadence values that I should be
putting on there as in other international locations.
Seen an unsettling post on voip-info about Singapore issues with Call
Polarity/Hangup Detection -- crossing my fingers I don't run into that
problem :-)
Analog lines here are mostly loopstart, so you need to enable busydetect
if you're using the zaptel FXO. A better option is to use a capi ISDN
BRI card. I used the Fritz! PCI card with chan_capi, costs around S$160.
The original poster on voip-info wrote about using kewlstart and CPC,
which I have never encountered over here. I guess it was in vogue during
the good old DID analog trunk days. But nowadays, you either use plain
analog or move to BRI/PRI if you need MSN/DDI.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
