> Basically you just plug it into an analog interface after installing the > GSM chip. > > The voice quality is good even in my office; a sort of radio waves-black > hole. Normally most cellphones just disappear when they are there.. > > The only problem I have so far is that the TDM400 FXO module does not > seem to read the caller id. > > A regular phone shows it, if I switch connections. > > It might be a problem of configuration of the TDM card; I have looked in > the wiki and googled around, but I do not know how I can change the way > a zaptel card reads the callerid. > > I will try to upgrade to 1.2.x asap to see if this helps. Hi, Do you have any success receiving the caller id with your TDM400 FXO? I have the same problem when I connect the GSM gateway to a SPA3000 FXO line and thought this a Sipura's problem. On a phone connected to the GSM gateway I can see the callerid, but not on the Sipura's PSTN line ... Thanks, benchev
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users