Well - a Sangoma Card won't bring you your money back. At least not
immidiately. ;-) And a expensive highend echo cancelling card is not a
good replacement for a relatively cheap TE405. So let's try to bring
your existing investion to work.

I presume you checked that your machine is working again if you remove
the TE405. (otherwise: buy new mainboard ;-])

Did the server just don't boot your OS or is the machine dead (as in no
BIOS activity etc.)

Did you put the card in one of the 5V 32bit slots?

Did you try to use the other 32bit slot?

Did you make sure the crad is not broken? (i.E. tried it in an other
machine)


We use a few TE405 on Intel TorreyPines and they at least boot.

Regards,
Chris



patty McHenry schrieb:
> The right direction is here: 
> http://www.sangoma.com/datasheets/p_aft-104d-specs?PHPSESSID=82b00b2122ed47a4ac6f4f56487d740f
>    
>    
>    
>   Subject: [Asterisk-Users] digium TE405P and intel motherboard
> 
> Hi,
> 
> Can please someone help me. I have successfully
> installed Asteriskathome 2.5 on a server with a  Intel
> Server Board SE7525RP2. May issue is after placing the
> TE405P in the server, it is not booting anymore. Has
> anyone in here have the same experience? Can someone
> please point me to the right direction. 
> 
> Thanks in advance,
> 
> Leonimar
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to