Goksie - I have found the F3000 works fine with Asterisk, however, the
general release of this phone has been pushed back several times by
UTStarcom. At present, we have none of these available. I might suggest
the Linksys WIP300 as an alternative.
Cory J Andrews
++++++++++++
VOIPSupply.com
454 Sonwil Drive
Buffalo, NY 14225
++++++++++++++
voice - 716.630.1555 X22
email - [EMAIL PROTECTED]
AIM - B2CORY
----- Original Message -----
From: "ADEGOKE ARUNA" <[EMAIL PROTECTED]>
To: "'Asterisk Users Mailing List - Non-Commercial Discussion'"
<asterisk-users@lists.digium.com>
Sent: Tuesday, February 28, 2006 6:49 AM
Subject: RE: [Asterisk-Users] Asterisk + WiFi Phones
What is the outcome of this finding on f3000.
goksie
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Cory Andrews
Sent: Thursday, November 24, 2005 10:04 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Asterisk + WiFi Phones
The F3000 is also a clamshell, "flip" type phone. I should be receiving
an eval unit shortly and will post my findings after we work it over in
the lab.
Cory Andrews
Senior Partner
+++++++++++
VOIPSupply.com
454 Sonwil Drive
Buffalo, NY 14225
+++++++++++
voice - 716.630.1555 X22
email - [EMAIL PROTECTED]
fax - 716.630.1548
Luki wrote:
UTStarCom has the F3000 coming in December, which will have according
to their spec
* WEP (64 and 128 bit )/WPA/MD5 Auth
* Handover/Roaming between different AP and SSID
So what else is different compared to the F1000? The 1000 also does
WEP 64/128 and WPA with the newest firmware. Not sure about MD5 auth,
but SIP nonce/MD5 response certainly is implemented.
Roaming kind of works, but could be improved. In one place I made it
from 4th floor -> elevator -> lobby while on the phone and without any
noticeable dropouts (ulaw codec). But the building was covered with
access points, on average NetStumbler saw 6 at the same time. So it
works, but not always.
Don't get me wrong, the phone does have issues and in my opinion is
not production quality, meaning it will freak out unexpectedly and
only a reboot helps, which hardly ever happens to any Sipura adapters
or phones. Hopefully the new 3.6 firmware performs better.
Luki
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
