Thanks Yeah, you would think so wouldn't you.....
Tried that , and still wouldn't boot Really annoying..... beacuse I've been doing work with the zaptel drivers and such and this happened once already... Thanks for the suggestion, Chris ----- Original Message ----- From: "Colin Anderson" <[EMAIL PROTECTED]> To: "'Chris Earle (CBL)'" <[EMAIL PROTECTED]>; "'Asterisk Users Mailing List - Non-Commercial Discussion'" <asterisk-users@lists.digium.com> Sent: Tuesday, February 28, 2006 10:05 AM Subject: RE: [Asterisk-Users] Cannot boot machine up after working on zaptel.... > What happens if you take out the Zaptel I/F's? If it boots, you can correct > whatever you did then replace them. > > hth > > -----Original Message----- > From: Chris Earle (CBL) [mailto:[EMAIL PROTECTED] > Sent: Tuesday, February 28, 2006 7:45 AM > To: asterisk-users@lists.digium.com > Subject: [Asterisk-Users] Cannot boot machine up after working on > zaptel.... > > > Hi all, > > hard for me to explain this, but it keeps happening on a number of machines > > I attempt to upgrade zaptel, or do something to zaptel modules..... and then > I reboot the machine, and for whatever reason, it hangs on loading the > modules > > Either the install wasn't complete, the zaptel modules settings are wrong, > whatever.... > but the problem is now I can't get past the boot up and the machine is > basically lost > > Is there any way to bypass the module load attempt or anything? > > I've tried holding SHIFT down to get the LILO menu, and loading LinuxOLD, > but no go > > I'm on Debian 2.4.18, with Zaptel 1.0.9.2 > > I understand that there was something wrong in the modules config, but > surely I should be able to bypass and get back in to fix it! > > Any ideas greatly appreciated, as I would rather not have to use an old > clone drive and start over > > > -- > Chris Earle > System Solutions Specialist > > > -- > This message has been scanned for viruses and dangerous content by > MailScanner, and is believed to be clean. > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > -- > This message has been scanned for viruses and dangerous content by > MailScanner, and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users