Just trying to think - are you using the standard E1 setup from ATP? I have found that the settings on their website work pretty well.....
Also - have you tried to put an answer in your dialplan? That might keep the dialplan open.. later, PaulH ----- Original Message ----- From: "Paul C" <[EMAIL PROTECTED]> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com> Sent: Wednesday, March 01, 2006 5:15 PM Subject: Re: [Asterisk-Users] incoming calls dropout on PRI over TE110p > > Paul C wrote: > >> I am running Asterisk 1.0.9 and have been running all my calls through a > >> VSP over a IAX2 trunk however we have recently purchased and connected a > >> TE110p to a PRI ( E1 with 16 voice channels ) through Optus. I can make > >> outgoing calls via it fine, however incoming calls are dropped after a > >> few seconds ( or as soon as a command like Playback, or the call is > >> picked up if forwarded to a SIP extensions ). > > >> SNIP << > > > > > overlapdial should usually be no in my experience. > > > Okay I've turned that to no with no change. I've just got off the phone to > Optus and apparently they had a client in melbourne last week and they fixed > the problem by turning crc checking off at the optus end. I don't suppose > that was anybody on here ? > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users