I've been having ongoing problems with my TDM400 FXS ports occasionally not picking up all digits dialled from my analogue handsets. There appears to be no set pattern to it, although number 1 seems to be slightly more frequently missed than other numbers.
I've played around with RX Gain settings and used ztmonitor to arrange the input signal between 50 and 75% of the maximum value (around -3 to -5), but it still seems to make little difference. It's a cordless base station (I have two of them each plugged into a FXS port) and if I move them to a spare grandstream ATA, it seems to be consistently fine. I'm running * 1.2.4 (via AAH 2.5) in case this makes a difference, but I've been experiencing these issues with every version of Asterisk I've tried from 1.0.9 upwards. I'm in the UK, if this makes a difference. Cheers, Chris -- Chris Notley [EMAIL PROTECTED] _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users