Mike Clark wrote:
Will the low cost X100P clones available on ebay provide a solid
hardware timing source? Our experience shows that while using ztdummy
with no zaptel hardware does allow MeetMe to function, we experience
unacceptable levels of delay after four ot five users join the
conference. With both TDM400 and Sangoma A101 hardware, we have had
20+ users with no problems.
We have a pure VoIP system installed, that has nor PRI or analog
lines, but does have a need for MeetMe. If a $15 card will do the
trick, we would obviously rather do that than spend a couple hundred
bucks for the same thing. This card would not be used for voice, just
timing.
Thanks,
Mike Clark
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Those do not have timing interfaces on them that I am aware of.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
