Hi all, I've attached a copy of the debug from the Trend, if anyone
cares to look.
I'll probablt get more of a response fromt the list than the automated
response from digium :(
Thanks
Bails
--- Begin Message ---
Dinesh Nair wrote:
On 03/16/06 04:45 bails said the following:
Hi whatever I set the span line to in zaptel.conf
ie span=1,0,0,ccs,hdb3,crc4
span=1,1,0,ccs,hdb3,crc4
span=1,2,0,ccs,hdb3,crc4
why are all your spans numbered 1 ? surely they should be numbered
1,2,3,... ?
[i'm assuming that there are many spans in your system]
no there is only 1 card this was an example of the same span configured
differently.
i have seen the bug for this but it says closed.
We hook this card/box up to 2 Trend Auroura testers yesterday one in NT
mode the other "sniffing" and the amount of sync errors and crc4 errors
make me believe the hardware is faulty.
A symtom of this was the ability to make incoming calls which were
terminated (sync errors green/red) and the inablility to make any
outgoing calls.
Bails
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--- End Message ---
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users