Any idea where I can get some of these units in Melbourne? Paul Hales AsteriskIT
> Faxing received by SpanDSP seems to work fine with these units. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Phelan Sent: Tuesday, 14 March 2006 9:00 AM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] MultiBRI in Australia - found one - maybe HI Craig and all that is following this. I am running a Vanilla 2.6.11 >From cli, misdn show config Misdn General-Config: -> VERSION: 0.2.1 -> DEBUG_LEVEL: 1 -> TRACEFILE: not set -> TRACE_CALLS: false -> TRACE_DIR: /var/log/ -> BRIDGING: no -> STOP_TONE_AFTER_FIRST_DIGIT: yes -> APPEND_DIGITS2EXTEN: yes -> L1_INFO_OK: yes -> CLEAR_L3: no -> DYNAMIC_CRYPT: no -> CRYPT_PREFIX: ** -> CRYPT_KEYS: test,muh So Far, no dropped calls etc.... Todays testing will be faxing. Dave -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Craig Guy Sent: Monday, 13 March 2006 6:42 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] MultiBRI in Australia - found one - maybe We went to kernel 2.6.15, and at the same time went to mISDN 0.3.0 rc25, we haven't had any lockups but users are reporting dropped calls. Unfortunately for us this means dropping chan_mISDN in favour of the Cisco router containing BRI cards and then SIP from the Cisco to Asterisk. It may still be possible to use chan_capi with the mISDN drivers for the Drayteks but for us we've run out of time which is a bit of a bummer. I believe the problem is in chan_mISDN which is admittedly still an experimental driver at this stage with release candidates every few days for the past couple weeks. I'm still interested to know how you guys get along with these adapters. As I said, I think the problem is within chan_mISDN at this stage rather than in the USB adapters, so maybe using chan_CAPI on top of mISDN hardware drivers or using chan_vISDN would be the way to go until chan_mISDN matures. Craig ----- Original Message ----- From: "James Harper" <[EMAIL PROTECTED]> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com> Sent: Monday, March 13, 2006 3:16 PM Subject: RE: [Asterisk-Users] MultiBRI in Australia - found one - maybe > > Got my 2 dreytek adapters today... > Dropped them on to my test system. After wadding thru my Memory of how to > setup mISDN, I had it up and running within about 2 hours. You might be receiving an email from me shortly then if I get stuck. If it wasn't for these annoying public holidays (Labour day in Victoria) mine would probably have arrived today too :) > Both of them operating in ptmp with no echo cancel turned on at this _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users