Hi I'm running exactly the same setup. Asterisk is running on my FW/NAT/Router with two interfaces. My local phones are situated behind the NAT and connects to the outer interface of the */FW/NAT/Router. * is then connected to my SIP providers (since I'm only using the SIP-part of *, PSTN connection through my SIP-provider). Works fine!
rgds, /staffan kerker sweden -----Ursprungligt meddelande----- Från: Steven M. Sokol [mailto:[EMAIL PROTECTED] Skickat: den 22 oktober 2003 17:22 Till: [EMAIL PROTECTED] Ämne: [Asterisk-Users] Running Asterisk and NAT on the same box? Has anyone tried installing * on a box with two eth interfaces which is acting as a NAT box? I have only one IP at this point and I would like to get * working without all of the NAT issues. My idea is to run * on my gateway (which is also running the firewall and masquerade services). All of my UAs (Grandstream + Xten X-LITE + gnophone) will be inside the NAT screen, and will connect to the * using its PUBLIC (outside) address. Does this sound reasonable? Thanks, Steve _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users