Thanks, working great now!
Peter Johnson wrote:
Have a look in the Polycom phone directory - see if the number of the first
7960 is defined in there with a ring type of 0 (silent).
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Rich Adamson
Sent: Sunday, 19 March 2006 1:51 PM
To: Asterisk Users-List
Subject: [Asterisk-Users] Polycom IP600 - no ring?
Have a strange problem...
When a C7960 calls the Polycom ip600, the ip600's first line button
blinks, the ip600 display shows the proper callerid, but the phone does
not ring at all.
If I call the same ip600 from a bt102, the ip600 rings properly.
If I call the same ip600 from another C7960, the ip600 rings properly.
All phones and asterisk are on the same lan within a few feet.
The ip600 is running v1.5.2.0054 and works very well in all other respects.
Any thoughts on how to diagnose this? (Its definitely not an asterisk
config problem.)
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
