> hi guys, i got a TDM400P FXS card an everything is > fine except for this when i do modprobe wcfxs > , the linux shows 2 TigerJet Network Inc Model 300 > 128k. i don't know why it is showing 2 of them. or is > that what it is?
> Freshmaker version: 63 > Freshmaker passed register test > ProSLIC on module 0 insane (1) 0 should be 2 > Module 0: Not installed > ProSLIC on module 1 insane (1) 0 cshould be 2 > Module 1: Not installed > ProSLIC on module 2 insane (1) 0 should be 2 > Module 2: Not installed > ProSLIC on module 3 insane (1) 0 should be 2 > Module 3: Not installed I get this with my TDM400P as well, except that it shows up as identically to the X100P in lspci: 00:0b.0 Communication controller: Tiger Jet Network Inc. Intel 537 00:0c.0 Communication controller: Tiger Jet Network Inc. Intel 537 lspci -v: 00:0b.0 Communication controller: Tiger Jet Network Inc. Intel 537 Subsystem: Unknown device b100:0003 Flags: bus master, medium devsel, latency 32, IRQ 9 I/O ports at 6500 [size=256] Memory at e4021000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 00:0c.0 Communication controller: Tiger Jet Network Inc. Intel 537 Subsystem: Unknown device 8085:0003 Flags: bus master, medium devsel, latency 32, IRQ 15 I/O ports at 6600 [size=256] Memory at e4022000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 I also get Power alarm on module 1, resetting! many times whenever the card is in use and have had all audio just up and quit once in a while... Is there a particular tech support mehodology with Digium or should I just RMA the module? Regards, Andrew _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users