Kyle Sexton wrote:
TE406P:
- PRIs will go from up and working fine, to "Provisioned, Down, Active"
after the server has been up for around 10 minutes, this may be
related to
rxfax and txfax being installed? Has anyone had an issue with this
specific
card? We have had this experience across multiple motherboards....
El Flynn wrote:
While my reply probably doesn't help you any, I just want to say that
I've been experiencing the same sort of problem. I've got a TE410P on
a server with an Intel SE7210TP1-E Entry level server motherboard...
We're running a TE406P in an IBM xSeries 330 and while we have not had
system stability problems (system has crashed once in six months --
gamma rays?), we are on our fourth card in about six months.
Card 1 failed outright after a couple of months
Card 2 never reliably handled DTMF unless vpmdtmfsupport was disabled
and ran for a couple of months before it started screwing up DTMF
detection regardless of vpmdtmfsupport
Card 3 seemed to be working fine for almost a month but now the talk-off
is bad regardless of vpmdtmfsupport
Card 4 is a newer version of the TE406 which is supposed to address the
DTMF problems -- will be shutting down our server at midnight tonight to
install the new TE406.
If Card 4 doesn't do the trick we'll probably drop the idea of using
TE4xx boards altogether and use Patton SmartNode 2400 PRI gateways instead.
--
George Pajari, netVOICE communications 604 484 VOIP (484 8647 x102)
Open Source VoIP/Telephony Specialists 1 877 NET VOIP (638 8647 x102)
www.netvoice.ca www.ip-centrex.ca
www.digium.ca www.grandstream.ca www.sipura.ca www.snom.ca
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
