Or just pop down to your local computer store and get a molex splitter.
Regards,
Mark.
Rich Adamson wrote:
The fxs ports have to generate ringing voltage (about 90 vac) and they
use the 12 volt power supply to do that. When an fxs port is not
ringing, it consumes about the same amount of power as an fxo port; not
much.
The 12 volt power is not available via the pci connector, so the TDM
cards use one of the disk drive connectors commonly found in most
chassis. The majority of 1U and 2U chassis do not have extra disk drive
power connectors wired in them.
If you're handy with electronics and a soldier gun, you can find and rig
the 12 volt power required for the cards in those chassis.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
