|
This is really the day for new experiences
– sorry for the load on the mailing list, but this will be the last issue
I try to solve before I take the night off;) So I’ve got the incoming calls to
work with a not-so-well solution (could therefore still need some feedback on
the previous email). But now it appears that the IVR menu doesn’t respond
to DTMF sent from my cellphone into Asterisk. I did a “iax2 debug”
and there’s no particular output about dtmf keys when I press them on the
cellphone, which basically tells me that the DTMF is probably passed on as
audio from my provider. However, IAX would be pretty useless if there’s
no way of accessing the selections in the IVR from a PSTN line. I’ve been searching the list, but
have yet to find a solution to this. Thanks for all help! Regards, Bjorn Fra: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] På vegne av Bjørn O I should add, I have now managed to get a
little further, but I still get an error message: Mar 29 18:17:34 NOTICE[11943]:
chan_iax2.c:7213 socket_read: Rejected connect attempt from 213.160.242.5, request
'[EMAIL PROTECTED]' does not exist Tx-Frame Retry[000] -- OSeqno: 001 ISeqno:
002 Type: IAX Subclass: REJECT Timestamp: 00036ms
SCall: 00003 DCall: 00002 [213.160.242.5:4569]
CAUSE : No such
context/extension CAUSE
CODE : 3 In my extensions.conf I’ve got an
entry for the phone number that I’m supposed to receive calls on: [default] Exten => 11223344,1,Dial(SIP/1000) Which basically forwards calls to that SIP
extension. However, why do I receive [EMAIL PROTECTED] from my provider (or
actually, the ‘default’ part is set in iax.conf) and not the
incoming number instead? Best regards, Bjorn Fra:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] På vegne av Bjorn O Hello all! I’ve got a problem with the IAX setup. I’m
previously only experienced with SIP, so that may be part of the problem.
However, I’ve managed to register with the IAX server without any trouble
(register line apparently works as it should), and I am also ale to make
outbound calls. However, for inbound calls, all I get is this (from iax2
debug): Mar 29 17:44:18 NOTICE[11502]: chan_iax2.c:6794 socket_read:
Rejected connect attempt from iax.providers.server.net, who was trying to reach
'{EXTEN}@' Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type:
IAX Subclass: REJECT Timestamp: 01015ms SCall: 00001
DCall: 00002 [iax.providers.server.net:4569]
CAUSE : No
authority found CAUSE CODE : 50 Any help would be appreciated. Regards, Bjorn -- --
-- --
-- |
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
