-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 > Ok when I modprobe wcte11xp I get the following > message > > ZT_CHANCONFIG failed on channel 26: No such device or > address > > Any ideas?
Hi Jon, Did you set the E1/T1 jumper on the card correctly? for UK/Europe it should be on the E1 position. In the T1 position it would only support 25 channels (24D+1B), EuroISDN provides 31 channels (30D+1B) Other than that, check the output of lspci which should list a "Network Controller" like this: 0000:00:0b.0 Network controller: Individual Computers - Jens Schoenfeld Intel 537 Does your /etc/zaptel.conf file look like this: span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 loadzone=uk defaultzone=uk HTH - -- Ron Wellsted [EMAIL PROTECTED] http://www.wellsted.org.uk N 52.567623, W 2.137621 Linux Counter No. 202120 FWD:519961 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2.2 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iQEVAwUBRCr/D0tP/KMNOfRbAQKkDggAnVrSvkdeXuMst66ewpPti3mOaVfTaxyY L41a7uGXHjGejs/CQZBwRWDnFQ5MhDB9bHuJl2CFt/qh23pD2irMVV3tDnb6waZw HGppbuQvIvXcGyzmhzNSPgQlLLgPZnapbvRGdJ5UtKJd44IzfXSPxjBR7Mst3nyS jyEJC+eFwvcsBF9hI7mVQ9YKiDgy1namI8OCKye7pLfdOLZdb8vkM4xaUOgVlo0c 27TbOWtYyfoL8pCaPONhwvk+4vDAcE8uRShNoUV/q2Jk4LXQHaL5B3uPZjypT6rY QdL3IqDBVcizXiWVX3xXkNK4qdycYA5Q/Art2vXlpqeygjRWywr+rw== =nwqE -----END PGP SIGNATURE----- _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users