Hi, "zap show channel 5" To see channel 5 specs, and take a look at "Echo Cancellation: 128 taps unless TDM bridged, currently OFF" during calls, you must have "ON". If you have hardware echocan module, as for TDM2400E, you must also read "DSP: yes" if this module is active.
Best Regards, Francois BERGERET, France. -----Message d'origine----- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] De la part de Giordano Grandis Envoyé : mardi 28 mars 2006 16:54 À : Asterisk Users Mailing List - Non-Commercial Discussion Objet : R: [Asterisk-Users] Echo cancellation Ok, but is there a way to check if echo cancellation is active on a call in progress ? Thanks Giordano -----Messaggio originale----- Da: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Per conto di Steve Davies Inviato: martedì 28 marzo 2006 16.43 A: Asterisk Users Mailing List - Non-Commercial Discussion Oggetto: Re: [Asterisk-Users] Echo cancellation On 3/28/06, Giordano Grandis <[EMAIL PROTECTED]> wrote: > > Hi all, > I'm using bristuff 0.2.0 RC8o with a HFC pci card and on several calls > I saw that the echo cancellation is on OFF > > Echo Cancellation: 0 taps, currently OFF (the result of "zap show > channel 1-1" for example) > Echo cancelling is only enabled if there is a call in progress. Cheers, Steve _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users