For 3804 default setting. Each 3804 fxo port can register to asterisk server. And you can dial each extension and hear the second dial-tone. But you can config the 3804 to one-stage dialing and just pass the phone number to 3804. The 3804 will callout directally.
Regards, Kevin -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Erick Perez Sent: Friday, March 31, 2006 11:28 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] welltech Wellgate 3804 in SIP mode one-stage calling function? On 3/30/06, kevin ling <[EMAIL PROTECTED]> wrote: > > Yes, > > Same configuration as Martin. > 1.for incoming call just set the 3804 "hotline" to one sip extension number. > 2.for outgoing call, you just using regular dail command to pass the > phone number to 3804 (3804 is a 4FXO port device, the call from ip > side always pass to FXO Port). You can telnet to the 3804 and enable > the one-stage calling function. > > Regards, > Kevin > > ________________________________ > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Martin > Joseph > Sent: Sunday, March 26, 2006 12:13 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] welltech Wellgate 3804 in SIP mode > > > > On Mar 25, 2006, at 6:26 PM, Erick Perez wrote: > > > Martin, i guess im in dumb mode today because i don't get what you > say, may also be because this will be my first welltech to configure. > what im trying to do is: > Sorry, I don't know if the 3804 actually uses a similar config setup > to my 3701a, so it might not be you at all. > > > remote_voip_gateway-------->asterisk----------->fox/fxs/and_internatio > nal_voip_providers call will always go -----> this way, no incoming > calls from the right of the diagram side to asterisk. > > Ok, then if it is similar to mine, all you need to do is set the SIP > configuration screen for the wellgate. Look under "SIP Config" and > "security config". Then to dial, you just use (repeated from below): > > For outbound ones, I think I just have a regular old > Dial(SIP/[EMAIL PROTECTED] in my dialplan where 2003 is the FXO port. > > Good Luck, > Marty > > PS I had to reflash my device with the SIP formware, as it arrived > with H323 firmware. > > > > > > > On 3/23/06, Martin Joseph < [EMAIL PROTECTED]> wrote: > > On Mar 22, 2006, at 10:24 PM, Erick Perez wrote: > > > Hi, does anybody have a working config or tips to connect the > > welltech wellgate 3804 (4fxo) unit to asterisk via SIP ? > > I think I register it via SIP with my * box, but when sending calls > > from * to the wellgate the unit does not pass the call to any of the > > fxo ports. > > > > I am using the 3701a, which is a 1 FXO 1 FXS deal. > > The trick for me was the "routing table" or something like that from > the Web based configuration screen. There I changed the default for > the FXO to point to IP, and the IP to default to the FXO. > > Then I also have the "line configuration" set so the extension I want > to ring ie 2020 is the "hotline" for the FXO. > > For outbound ones, I think I just have a regular old > Dial(SIP/[EMAIL PROTECTED] in my dialplan where 2003 is the FXO port. > > HTH? > Marty > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > -- > > ------------------------------------------- > Erick Perez > Linux User 376588 > http://counter.li.org/ (Get counted!!!) Panama, Republic of Panama > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > -- ------------------------------------------- Erick Perez Linux User 376588 http://counter.li.org/ (Get counted!!!) Panama, Republic of Panama _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users