Hi all I finaly set up a second * with two ZapHFC Cards. One in TE the other in NT mode.
So I have a 1.2.5 Asterisk to run Meetme etc... and a 1.2.4 Asterisk to run all that Zaptel stuff. First I used mISDN on 1.2.5 which worked, but sometimes had strange behaviour. So my hope was that zaptel is more stable... It steams realy stable in TE mode. No problem there. But I get a very strange behaviour in NT mode. I have two different ISDN phones here. Booth worked with mISDN. Only one can dial with zaphfc. With the other * does not recognize the dialed extension... Here is what I get: Phone 1 (working one): I press 11 and take it of hook: == Primary D-Channel on span 1 up for TEI 64 -- Extension '11' in context 'from-zap' from '0010618115711' does not exist. This is fine. I dialed 11 and it actuely does not exist. Phone 2 (the one which is unable to dial) I press 11 and then take it off-hook: == Primary D-Channel on span 1 up for TEI 64 -- Accepting voice call from '010618115711' to 's' on channel 0/2, span 1 -- Executing NoOp("Zap/2-1", "BLAH s") in new stack I seam not to find any way to get the dialed extension passed from the phone to *. What am I doing wrong? I did try DISA to check if the number is passed after the phone is off hook, but this just doesn't seam the case... The extension was recognized with mISDN. Any ideas? -Benoit- _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users