hi All
I need your help , for used Digium Card TE405P, for setting this Board AS E1 ISDN PRI.
1 .Current for make sure my config its rights or no I inform my configurations in Board Jumper T1/E1 is Closed is that rights or no ? for E1 i closed the Jumper.
2. I Want To seeting E1 in ASterisk/PC Back To Back To Cisco E1 AS5300 Use ISDN Signaling,
my configutration :
softphone --- > ASterisk ---> AS5300
I need your help me to rights
configurations Zapata.conf and zaptel.conf
FYI iam already load :
modpobe zaptel
modprobe wct4xxp t1e1override=15 debug=1
and current /etc/zaptel.conf
span=1,0,0,ccs,hdb3,crc4,yellow
span=2,0,0,ccs,hdb3,crc4,yellow
span=3,0,0,ccs,hdb3,crc4,yellow
span=4,0,0,ccs,hdb3,crc4,yellow
current i have problem error message in cisco as5300 after make a call, if used debug isdn q931
in cisco AS5300 config :
isdn siwtch-type primary-net5
controller e1 0
framming crc4
linecode hdb3
pri-group 1-31
interface serial0:15
isdn switch-type primary-net5
isdn incomming-voice modem
isdn T310 60000
dialpeer,.....blah,...blahh
thanks for ur help
Dirgan
Send instant messages to your online friends http://asia.messenger.yahoo.com
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
