On 4/14/06, Rich Adamson <[EMAIL PROTECTED]> wrote: > I believe the TDM2400 has the capability of doing on-card fxo->fxs data > flows (without hitting the pci bus), but that function has not yet been > implemented. Its basically "required" to support faxes in an analog > environment. When it is implemented, that card should work. The TDM400 > card will not work in 99% of the deployments.
I apologize if I'm being dense, but I don't understand why the fact that a call traverses the PCI bus would kill a fax transmission. I made the following setup, and it consistently gets 31200 and 33600 connects, no disconnects, good throughput: Modem --- SIP ATA(G.711u) --- (LAN) --- Asterisk --- (TDM400FXS) --- Modem I get the same thing (although alwyas 31200 connects, never 33600) with: Modem --- (TDM400FXS) --- Asterisk --- (TDM400FXS_same_card) --- Modem If this works, I don't see why a fax transmission wouldn't work. Is it because the fax protocol doesn't have error correction? Is that even true? I realize that clearing up my confusion about this isn't probably going to result in the problem being fixed, but I sure would like to know... -Rusty _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users