Do you know if you can tweak gains if using unicall? I tried it once and if you move the gains on zaptel using a te110p with unicall on E1, when gains are +2 or -1, calls do not complete, forget even about faxing :)
|-----Original Message----- |From: [EMAIL PROTECTED] |[mailto:[EMAIL PROTECTED] On Behalf Of |Doug Lytle |Sent: Tuesday, April 18, 2006 10:18 AM |To: Asterisk Users Mailing List - Non-Commercial Discussion |Subject: Re: Faxing and PCI (was Re: [Asterisk-Users] Digium cards, | |Steve Underwood wrote: |> Doug Lytle wrote: |> |>> Nicholas Kathmann wrote: |> |> |> If you need to tweak gains something is seriously wrong. |> |The 2 fax machines that I was having problem with were failing |to train at 9600bps, they would then try at 7200 and finally |train at 4800. |Around 15 pages into the fax they would fail with a, "Failed |to detect high speed-data carrier" and disconnect. Increasing |the rxgain to 3.0 and they now train at 9600bps and faxes complete. | |This PRI is connected to our Definity G3. | |Doug | |_______________________________________________ |--Bandwidth and Colocation provided by Easynews.com -- | |Asterisk-Users mailing list |To UNSUBSCRIBE or update options visit: | http://lists.digium.com/mailman/listinfo/asterisk-users | | _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users