OK, I got IAX to work. Which SIP bone I should break to force it into working? ;)
Peter > IAX should work well behind NAT without further configuration than just > a single port forward. RTP based protocols such as MGCP, SIP and H.323 > require helper agents on the NAT box to work, although SIP can be forced > to work by slightly breaking it. > > roy > > On Mon, 2003-10-27 at 10:00, Peter Zeltins wrote: > > I'm trying to set up * server behind NAT. The box is set up as DMZ in > > my DSL router, i.e. all incoming connections without explicit port > > mapping are forwarded to *. So far I'm unable to get this setup to > > work for either IAX or SIP (tried IAXComm & XLite softphones on public > > IP address). Data seems to come in fine (IAX/SIP debug shows message > > interaction taking place), but there is no audio. > > > > Am I missing something in */router setup or such thing cannot be done? > > I suspect that I need to override local IP address being sent out in > > SIP/IAX packets, but I see no such option in either iax.conf or > > sip.conf > > > > TIA, > > Peter > > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
