Using an SMP kernel will fix the interrupt sharing, you could also disable
hyperthreading and set runlevel 3. FWIW I almost exclusively use Poweredge
850 for my * servers with a third party sata raid controller if raid is
required. Never had any problems.
Craig
----- Original Message -----
From: "Remco Barende" <[EMAIL PROTECTED]>
To: "Asterisk Users List" <asterisk-users@lists.digium.com>
Sent: Monday, April 24, 2006 6:38 PM
Subject: [Asterisk-Users] Dreadful results from zttest with TE210P and
Dell2850?
Hi list!
I'm trying to setup a new * server with a TE210P in a Dell 2850 box. I'm
using zaptel version 1.2.5, the linux flavour I'm using is CentOS 4.
In a previous thread I read about the results I should expect from zttest.
On my home box (using the crappy Asus A7V600) I got really bad results
from zttest (just over 97.5) but I know that this motherboard just sucks.
To my (huge) disappointment however the results from zttest are equally as
bad as from my home box?? (just over 97.5)
lspci -vb reveals that the card is sharing IRQ 3 with the second Gbit LAN
controller.
The box is only idling I'm the only user shh'ing into it.
Does anyone have a clue why the results from zttest are this horrible?
Looking at the wiki I don't even need to try and put the box into
production with such results.....
Thanks!
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users