Joe Greco wrote:
Hello all,
Just got hold of a CISCO 7960G. Updated the Firmware to the latest 8.2.
As you all know it has 6 lines which is why i bought it.
Just would like to know from you experts if this piece will connect to
6 different providers over the internet or will it only work as 6
extns with 1 provider. Im not able to get connected to more than one
provider.
I believe the phone is supposed to be able to do it, but I haven't figured
out just how. I've got a few in remote locations where we had picked up
a local number for "line six = direct to the phone" use, and I ended up
proxying them through the PBX here instead, which is not really that great.
In the phone config file add
proxy1_address: <provider 1 proxy>
proxy1_port: 5060
proxy1_register: 1
proxy2_address: <provider 1 proxy>
proxy2_port: 5060
proxy2_register: 1
Repeat these definitions for each provider then add the corresponding
lineX_yyyy parameters as needed.
-Steve
So you're not crazy... I suspect it's just a little specific config magic
that isn't quite set to what the phone wants as it stands.
... JG
--
ISC Network Engineering
The University of Pennsylvania
3401 Walnut Street, Suite 221A
Philadelphia, PA 19104
voice: 215-573-8396
215-746-8001
fax: 215-898-9348
sip:[EMAIL PROTECTED]
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users