Kerry Garrison wrote:
On a TDM2400 with 3 FXO modules, is there a way to split each line into
basically being its own trunk or another way to pull off the following
scenerio:
PBX has 12 inbound PSTN lines
1,3,5,7 are the 714 phone number hunt group
2,4,6,8 are the 888 phone number hunt group
9-12 are fax lines
Customer wants outbound calls to go out in the following order:
8,7,6,5,4,3,2,1,12,10,11,9
Asterisk does not have any way to specifically define the order zap
channels are used for outgoing calls (eg, 8,7,6,5...).
The only reasonable way I can think of is to rearrange the actual pstn
connections so as to appear in the zap channel order that you want, and
then use the group= parameter on those channels.
Something like:
move pstn line #8 to zap channel 1 and use group=1
move pstn line #7 to zap channel 2 and use group=1
move pstn line #6 to zap channel 3 and use group=1
etc, etc.
Then send your outbound calls to "g1" or "G1".
The inbound calls on those pstn lines will still follow whatever context
you define for each zap channel.
R.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
