Hi, I have make some test. If asterisk can decode the callerid. The asterisk will answer the call after 2 rings. But when asterisk have some problem to get the callerid. Asterisk pickup the call after 3-4 rings.
Regards, Kevin -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Giorgio Incantalupo Sent: Wednesday, April 26, 2006 4:59 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Excessive Asterisk delay to answer on ZAP inboundcall Hi, I have an asterisk 1.2.1 on a Debian Sarge distro with *three* TDM400P (12 fxo ports). I noticed Asterisk is slow to answer inbound calls so I connected an analog phone in parallel to make a test: __________Asterisk fxo ---- line -----| -----------------Analog phone The analog phone rings immediately when calling, while asterisk shows the message "Starting simple switch on zap..." after the first ring and executes the old extension script after the second ring (for example a NoOp instruction). Why does Asterisk wait for these two rings? What is it doing meanwhile? Is it possible to shorten this interval to have an immediate response? TIA Giorgio Incantalupo _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users