RE: [Asterisk-Users] Problems with zaptel and TE210P

Mon, 01 May 2006 12:21:26 -0700

His PRI span is showing down, If you forget to add the ${EXTEN} as you said it would show as connecting and he _should_ get an intercept from the telco.

 

 

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Colin Anderson
Sent: Monday, May 01, 2006 2:53 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] Problems with zaptel and TE210P

 

Just a stab:

 

exten => _9NXXXXXX,1,Dial(ZAP/g1/${EXTEN})

 

Note uppercase ZAP and explicitly specifying the dialled number.

 

hth

-----Original Message-----
From: Dan Brummer [mailto:[EMAIL PROTECTED]
Sent: Monday, May 01, 2006 12:48 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Problems with zaptel and TE210P

Some more info to my problem:

 

ipt-dev01*CLI> zap show status

Description                              Alarms     IRQ        bpviol     CRC4

T2XXP (PCI) Card 0 Span 1                OK         0          0          0

 

ipt-dev01*CLI> pri show span 1

Primary D-channel: 24

Status: Provisioned, Down, Active

Switchtype: National ISDN

Type: CPE

Window Length: 0/7

Sentrej: 0

SolicitFbit: 0

Retrans: 0

Busy: 0

Overlap Dial: 0

T200 Timer: 1000

T203 Timer: 10000

T305 Timer: 30000

T308 Timer: 4000

T313 Timer: 4000

N200 Counter: 3

 

Any ideas? ZTCFG looks good.

 

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dan Brummer
Sent: Monday, May 01, 2006 10:41 AM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] Problems with zaptel and TE210P

Hello,

I'm just starting out with asterisk and I'm playing around with the system.  Currently I have a Digium TE210P connected to a PRI on the Asterisk server.  I have a SIP soft phone on my laptop for testing that is working fine.  When I try to place a call from my soft phone I get this from Asterisk:

 

May  1 09:11:41 NOTICE[20098]: app_dial.c:1029 dial_exec_full: Unable to create channel of type 'Zap' (cause 34 - Circuit/channel congestion)

  == Everyone is busy/congested at this time (1:0/1/0)

  == Auto fallthrough, channel 'SIP/test-3a26' status is 'CONGESTION'

 

 

#/etc/zaptel.conf:

span=1,0,0,esf,b8zs

bchan=1-23

dchan=24

 

#/etc/asterisk/zapata.conf:

[channels]

switchtype=national

context=default

signalling=pri_cpe

group=1

channel => 1-23

 

#/etc/asterisk/extensions.conf:

[general]

static=yes

writeprotect=no

autofallthrough=yes

 

[default]

exten => 123,1,Answer()

exten => 123,2,Playback(hello-world)

exten => 123,3,Hangup()

 

exten => _9NXXXXXX,1,Dial(Zap/g1)

 

 

Any ideas?  Thank you in advance, your help is greatly appreciated.

 

-Dan

 

 

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to