I have a fxo card configured and working on both inbound and outbound calls. Telasip is working outbound. I put in the recommended (by telasip) changes to the trunk for incoming, e.g.
host=gw4.telasip.com
insecure=very
qualify=yes
type=user
context=from-pstn
Then I went to incoming routes and set it up for any did, any cid, but the telasip connection is taking a different route. Here are the log entries for both.
Telasip:
May 2 11:11:55 DEBUG[2670] chan_sip.c: Checking SIP call limits for device jlynch
May 2 11:11:55 DEBUG[2670] chan_sip.c: build_route: Contact hop: < sip:[EMAIL PROTECTED]>
May 2 11:11:55 VERBOSE[6343] logger.c: -- Executing Set("SIP/jlynch-cf63", "FROM_DID=6782280738") in new stack
May 2 11:11:55 VERBOSE[6343] logger.c: -- Executing Answer("SIP/jlynch-cf63", "") in new stack
May 2 11:11:55 VERBOSE[6343] logger.c: -- Executing PlayTones("SIP/jlynch-cf63", "ring") in new stack
May 2 11:11:55 DEBUG[6343] channel.c: Scheduling timer at 160 sample intervals
May 2 11:11:55 VERBOSE[6343] logger.c: -- Executing NVFaxDetect("SIP/jlynch-cf63", "0") in new stack
May 2 11:11:55 DEBUG[6343] app_nv_faxdetect.c: Preparing detect of fax (waitdur=4ms, sildur=1000ms, mindur=100ms, maxdur=-1ms)
May 2 11:11:55 DEBUG[2670] chan_sip.c: Stopping retransmission on '[EMAIL PROTECTED]' of Response 102: Match Found
May 2 11:11:55 DEBUG[2670] chan_sip.c: Stopping retransmission on ' [EMAIL PROTECTED]' of Response 103: Match Found
May 2 11:11:55 DEBUG[6343] channel.c: Scheduling timer at 0 sample intervals
May 2 11:11:55 DEBUG[6343] app_nv_faxdetect.c: Got hangup
Zap:
May 2 10:55:09 DEBUG[2670] chan_sip.c: build_route: Contact hop: <sip:[EMAIL PROTECTED]>
May 2 10:55:09 VERBOSE[6287] logger.c: -- SIP/200-9b14 answered Zap/1-1
May 2 10:55:09 DEBUG[6287] chan_zap.c: Requested indication -1 on channel Zap/1-1
May 2 10:55:09 DEBUG[6287] channel.c: Scheduling timer at 0 sample intervals
May 2 10:55:15 DEBUG[6287] channel.c: Didn't get a frame from channel: SIP/200-9b14
May 2 10:55:15 DEBUG[6287] channel.c: Bridge stops bridging channels Zap/1-1 and SIP/200-9b14
May 2 10:55:15 DEBUG[6287] chan_sip.c: update_call_counter(200) - decrement call limit counter
May 2 10:55:15 DEBUG[6287] app_dial.c: Exiting with DIALSTATUS=ANSWER.
May 2 10:55:15 VERBOSE[6287] logger.c: == Spawn extension (macro-dial, s, 10) exited non-zero on 'Zap/1-1' in macro 'dial'
May 2 10:55:15 VERBOSE[6287] logger.c: == Spawn extension (macro-dial, s, 10) exited non-zero on 'Zap/1-1' in macro 'exten-vm'
May 2 10:55:15 VERBOSE[6287] logger.c: == Spawn extension (macro-dial, s, 10) exited non-zero on 'Zap/1-1'
I even attempted to add an incoming route using the Telasip did, but it didn't work either. I have the radio button clicked in each of them to route the call to extension 200.
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
