I think you need to upgrade to the latest Asterisk. Your version is pretty ancient.
> We are using v1.0.8 ----- Original Message ----- From: "Michael George" <[EMAIL PROTECTED]> To: <asterisk-users@lists.digium.com> Sent: Thursday, May 04, 2006 2:48 AM Subject: [Asterisk-Users] meetme conference latency degrades... > We have recently started making more frequent use of the meetme > conference of our * system. > > We are using v1.0.8 with a 2.6.11 kernel on our system. > > We generally have 4 callers in it: two with the gsm codec and 2 with g729. > Initially, the conference works fine and there is little latency. After > about 15min., though, the latency is very noticable and by 25min it's > unbearable. > > If we all leave the conference and return, the latency is unnoticable > again. > > The load on the box is minimal, and only our meetme is running most of > the time. Checking system load with top shows 0.1 or less. > > We have no digium hardware and use ztdummy for our timing device. > zttest yields results generally in the area of 99.96%, but about 3-4% > will be as low as 95%. > > In much smaller systems with Digium hardware, the accuracy is never > below 99.98% and is often 100%. > > Is this apparent inaccuracy of the ztdummy timer likely the cause of the > increasing latency in our meetme conference? > > Is there any way to improve it? > > Thank you, in advance, for any help. > > -- > -M _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
