Go into the BIOS, disable every possible device such as floppy controller, usb, serial, parallel, etc. If that doesn't work, move card to another slot.
> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Giorgio Incantalupo > Sent: Friday, May 05, 2006 1:39 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] Help with IRQ conflict between > wct2xxp and eth0 > > Hi Phil, > may sound a stupid advice but....have you tried to change PCI > slots on your server? > > Giorgio > > Phil Menico wrote: > > > > I have a conflict problem with the eth0 card and wct2xxp > digium board. > > The PRI can receive calls but my network connection is gone. > > > > When I "cat /proc/interrupts" I get the following: > > > > 1 .. > > > > 1 .. > > > > .. > > > > .. > > > > .. > > > > 169 0 IO-APIC-level wct2xxp, eth0 > > > > .. > > > > etc. > > > > even before I "modprobe wct2xxp" > > > > After I "modprobe wct2xxp" and "modprobe wctdm" and again run "cat > > /proc/interrupts" > > > > I then get: > > > > > > > > .. > > > > .. > > > > .. > > > > .. > > > > .. > > > > 169 118489 IO-APIC-level wct2xxp, eth0 > > > > 201 118497 IO-APIC-level wctdm > > > > .. > > > > etc > > > > > > > > How can I force the wct2xxp to load on a separate IRQ? I > tried moving > > the eth0 to IRQ 10 but could not. > > > > Any ideas? > > > > > > > > > > Thank you. > > > > _*/Phil Menico/*_ > > > > XTEND Communications > > 171 Madison Avenue, New York, NY 10016 > > 212-951-7632 (Office) > > 212-951-7683 (Fax) > > www.xtend.com > > > > > > > > > ---------------------------------------------------------------------- > > -- > > > > _______________________________________________ > > --Bandwidth and Colocation provided by Easynews.com -- > > > > Asterisk-Users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users