I guess that depends on the type of loop that serves you. If it is a HDSL loop then the SmartJack would be responsible for the build out. If it is a traditional T1 loop it would be set from the CO.
> -----Original Message----- > From: [EMAIL PROTECTED] [mailto:asterisk-users- > [EMAIL PROTECTED] On Behalf Of Eric "ManxPower" Wieling > Sent: Saturday, May 06, 2006 2:23 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] Info > > Alexander Lopez wrote: > > The line build out value is a power level that is set based on the > > distance from the Device to the T-1 service provider's gateway. If the > > device is close by, the gateway requires less power and the line build > > out value is lower; if the device is far away, the gateway requires more > > power and the line build out value is higher. This setting is determined > > by the T-1 service provider. > > The LBO for all T-1s that I've ever seen has been from the smartjack, > not the CO. > > > -- > Now accepting new clients in Birmingham, Atlanta, Huntsville, > Chattanooga, and Montgomery. > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users