I'm
currently using this setup for a channelized T1 for voice and
data.
First
9 channels of the T1 are voice - the rest are data for
internet.
Works
extremely well!
This
is being used for a production server that receives/places around 500 calls per
day.
-----Original Message-----
From: Ray Burkholder [mailto:[EMAIL PROTECTED]
Sent: Wednesday, October 29, 2003 9:01 AM
To: [EMAIL PROTECTED]
Subject: [Asterisk-Users] FW: Voice/Data mixed routing over Digium E1/T1 Card
The documentation mentions that the Digium channels can be split into some voice channels and the remainder of the channels used for routing IP traffic.
Does any one have this in use in conjunction with Asterisk? Does it work well? Would you recommend it for a production server?
Obviously, if this works, this makes for a cost effective platform where you obtain one E1/T1 to a provider, and they can provide TDM and data over the one circuit. No separate router required.
Ray Burkholder
[EMAIL PROTECTED]
http://www.oneunified.net
704 576 5101
--
Scanned for viruses & dangerous content at One Unified and is believed to be clean.