Roger Gulbranson wrote:
On Thu, 2006-05-11 at 11:13 -0400, Steve Totaro wrote:
I was able to install the card and get wctdm to load with the timingonly
= 1 setting.
I cannot run ./zttest though, I get "Unable to open zap interface: No
such device or address" Does this mean that I am not getting timing?
Is this a 2.6 kernel? You may need to configure the /dev/zap
interfaces.
Do I actually have to configure any of the conf files at all or should
modprobe zaptel, modprobe wctdm without errors be enough.
It *should* be enough (my comments above withstanding). NB: I was doing
this on SPARC Solaris -- there are numerous differences which could
affect you.
It is CentOS 2.6.9-34.EL SMP
Is there something in particular I have to configure based on below?
[EMAIL PROTECTED] ~]# cd /dev/zap/
[EMAIL PROTECTED] zap]# ls -la
total 0
drwxr-xr-x 2 root root 120 May 11 07:15 .
drwxr-xr-x 9 root root 4580 May 11 07:15 ..
crw-rw---- 1 asterisk asterisk 196, 254 May 11 07:15 channel
crw-rw---- 1 asterisk asterisk 196, 0 May 11 07:15 ctl
crw-rw---- 1 asterisk asterisk 196, 255 May 11 07:15 pseudo
crw-rw---- 1 asterisk asterisk 196, 253 May 11 07:15 timer
[EMAIL PROTECTED] zap]#
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users