|
I'm trying to connect an Asterisk T1 port to a
Dialogic card. The Dialogic side is an external VMS.
I setup for ISDN-PRI between systems and have
green lights on both card/ports. Zttool shows connection is good also.
However, when I try attempt terminate or
originate a call to either system, nothing
appears of CLI. How can I monitor the "D"
channel?
zaptel.conf:
# Span 8: TE4/1/4 "TE410P (PCI) Card 1 Span 4"
ISDN/PRI RED
span=8,0,0,esf,b8zs
bchan=169-191 dchan=192 zapata.conf:
;----------------------------------------------------
; Span 8: TE4/0/4 "TE410P (PCI) Card 1 Span 4" ; ; switchtype=national signalling=pri_net ; Dialogic set for CPE ;nsf = megacom pridialplan=unknown echocancel=yes overlapdial=no immediate=no echocancelwhenbridged=yes echotraining=yes rxgain=0.0 callprogress=no group=8 context=from-internal channel => 169-191 Any ideas I could try?
Bart
|
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
