You are correct, That is why the PAGE() Application was made. It creates a MeetMe room, calls the Technologies on the list and transfers the calls to the temp MeetMe.

 

 

 


From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lacy Moore - Aspendora
Sent: Friday, May 12, 2006 2:42 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Paging and Auto Answer on Grandstream GXP2000

 

I must be missing something.  Seems to me that only one phone would connect.  This is just a plain dial command that rings all those extensions and when one answers, the rest stop ringing.

 

Right?

 

On 5/12/06, Tom Vile <[EMAIL PROTECTED]> wrote:

make the dial command like so:

exten => PAGE203,n,Dial(SIP/203&SIP/204&SIP/205SIP/206,5)

On 5/12/06, Forrest Beck <[EMAIL PROTECTED]> wrote:
> Thanks.  I like that method.
>
> Do you think if I add all my extensions (say 40 of them) to new Dial
> commands after "exten => PAGE203,n,Dial(SIP/203,5)"
>
> Like this:
> exten => PAGE203,n,Dial(SIP/203,5)
> exten => PAGE203,n,Dial(SIP/204,5)
> exten => PAGE203,n,Dial(SIP/205,5)
> exten => PAGE203,n,Dial(SIP/206,5)
>
> will work?
>
> The only think I am not sure about is if a phone doesn't answer in the 5
> seconds allowed, it will hang until that 5 seconds is up to parse the next
> line.
>
> Also, if it is dialing each phone line by line will there be a delay for all
> the phones are dialed and pick up.
>
> Thanks again.
>
> Forrest
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] ] On Behalf Of Tom Vile
> Sent: Friday, May 12, 2006 10:21 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] Paging and Auto Answer on Grandstream GXP2000
>
> This is what I use:
>
> [ext-paging]
> exten => PAGE203,1,Set(__SIPADDHEADER=Call-Info: answer-after=0)
> exten => PAGE203,n,Set(__ALERT_INFO=Ring Answer)
> exten => PAGE203,n,Set(__SIP_URI_OPTIONS=intercom=true)
> exten => PAGE203,n,Dial(SIP/203,5)
> exten => Debug,1,Noop(dialstr is LOCAL/[EMAIL PROTECTED])
> exten => 2030,1,Page(LOCAL/[EMAIL PROTECTED])
>
> if I dial 2030 it will page extension 203.  Change accordingly.  This
> works on my Grandstream and Snom phones.
>
>
> On 5/12/06, Forrest Beck <[EMAIL PROTECTED]> wrote:
> > Asterisk 1.2.7.1 and Zaptel 1.2.5
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto: [EMAIL PROTECTED]] On Behalf Of Tom Vile
> > Sent: Thursday, May 11, 2006 6:55 PM
> > To: Asterisk Users Mailing List - Non-Commercial Discussion
> > Subject: Re: [Asterisk-Users] Paging and Auto Answer on Grandstream
> GXP2000
> >
> > What version of Asterisk?
> >
> > On 5/11/06, Forrest Beck < [EMAIL PROTECTED]> wrote:
> > >
> > >
> > >
> > >
> > > I am looking to setup paging using the auto answer feature on the
> > > Grandstream GXP2000.  I am thinking I will follow the method as
> described
> > > here:
> > >
> > >
> > >
> > > http://www.voip-info.org/wiki/index.php?page=Asterisk+cmd+page
> > >
> > >
> > >
> > > I will setup the 4th account on the phone to auto answer.
> > >
> > >
> > >
> > > Does anyone else have a method that works better?  I also looked at the
> > > allpage AGI written on Voip-Info.  But it seems to dial all extensions,
> > even
> > > the ones I don't want to use for Auto Answer.
> > >
> > >
> > >
> > > I really would like a way to group the phones instead of having them all
> > > listed in a dial command.
> > >
> > >
> > >
> > > exten =>
> > > 7999,2,Page(Local/[EMAIL PROTECTED]&Local/[EMAIL PROTECTED]&Local/[EMAIL PROTECTED]/n&Local/interal
> > > [EMAIL PROTECTED]|)
> > >
> > >
> > >
> > > Thanks!
> > > _______________________________________________
> > > --Bandwidth and Colocation provided by Easynews.com --
> > >
> > > Asterisk-Users mailing list
> > > To UNSUBSCRIBE or update options visit:
> > >
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> > >
> > >
> >
> >
> > --
> > Tom Vile
> > Baldwin Technology Solutions, Inc
> > Consulting - Web Design - VoIP Telephony
> > www.baldwintechsolutions.com
> > Phone: 518-631-2855 x205
> > Fax:     518-631-2856
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > Asterisk-Users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > Asterisk-Users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
>
> --
> Tom Vile
> Baldwin Technology Solutions, Inc
> Consulting - Web Design - VoIP Telephony
> www.baldwintechsolutions.com
> Phone: 518-631-2855 x205
> Fax:     518-631-2856
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>     http://lists.digium.com/mailman/listinfo/asterisk-users
>


--
Tom Vile
Baldwin Technology Solutions, Inc
Consulting - Web Design - VoIP Telephony
www.baldwintechsolutions.com
Phone: 518-631-2855 x205
Fax:     518-631-2856
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users




--
Lacy Moore
Aspendora, Inc.

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to