> - After the first ring on my cell, Asterisk logs to the CLI that is
> has an incoming call
> - After the second ring, it kicks off part of the incoming call context
I fixed this by setting:
usecallerid=no
in zapata.conf
I made this change and it helped in that it reduced the number of
rings. So instead of taking 3 rings, it's taking 2.
I notice after the first ring, I see the following in the CLI:
-- Starting simple switch on 'Zap/4-1'
-- Executing Goto("Zap/4-1", "from-pstn|1347|1") in new stack
-- Goto (from-pstn,1347,1)
-- Executing Set("Zap/4-1", "FROM_DID=1347") in new stack
-- Executing Set("Zap/4-1", "FAX_RX=disabled") in new stack
-- Executing Answer("Zap/4-1", "") in new stack
-- Executing PlayTones("Zap/4-1", "ring") in new stack
-- Executing NVFaxDetect("Zap/4-1", "0") in new stack
I then get a pause andafter the second ring I then see:
-- Executing Goto("Zap/4-1", "ext-local|200|1") in new stack
-- Goto (ext-local,200,1)
-- Executing Macro("Zap/4-1", "exten-vm|200|200") in new stack
-- Executing Macro("Zap/4-1", "user-callerid") in new stack
-- Executing Set("Zap/4-1", "AMPUSER=") in new stack
-- Executing Set("Zap/4-1", "EMERGENCYCID=") in new stack
-- Executing Set("Zap/4-1", "AMPUSERCIDNAME=") in new stack
-- Executing GotoIf("Zap/4-1", "1?6") in new stack
[snip]
I wonder if the NvFaxDetect() call is causing the extra delay. I
guess I can manually edit the files (I foundi it in one file after my
cursury check) to remove that line, but I'm a bit reluctant to do that
since I use AMP within [EMAIL PROTECTED] to do my configuration.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users