That did the trick! Thank you Christopher! Isaac
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Christopher Stephens Sent: Wednesday, October 29, 2003 11:39 AM To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] Voicepulse and IAX The instructions they sent you (and me) are slightly faulty. in iax.conf: context=VPWS ;I'm not sure what VPWS stands for. would better be context=from-voicepulse ;(for example...this is what I use) then in extensions.conf: (this is the simplest example) ;----snip---- [from-voicepulse] exten=>3017275115,1,Dial(SIP/1234) ;obviously replacing 3017275115 with your voicepulse # (if it isn't already) ; and SIP/1234 with your registered SIP client or Zap channel or whatever. ; then this phone will ring when someone calls your number. You could, of course, leave the context as VPWS in iax.conf, just make sure there is a corresponding context in your extensions.conf. An incoming call that no context/extension covers is the source of the NOTICE you mentioned. Hope this helps! Chris ----- Original message ----- From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Date: Wed, 29 Oct 2003 17:07:42 +0000 Subject: [Asterisk-Users] Voicepulse and IAX I am trying to set up IAX with Voicepulse. When I turn on debugging I get the following message when I call my PSTN number: NOTICE[1142106560]: File chan_iax2.c, Line 4321 (socket_read): Rejected connect attempt from 66.234.228.132, request '[EMAIL PROTECTED]' does not exist Any help would be GREATLY appreciated. Thanks, Isaac [EMAIL PROTECTED] _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users