Have you compared the disconnect tone on both units - after all, you say one
of them works fine.
On mine (default since I didn't change this part) it is :
[EMAIL PROTECTED],[EMAIL PROTECTED];4(.25/.25/1+2) on the PSTN page
In case you're wondering, it is not working here either (not US).I use * #
to force a hangup or *1# for a follow-on call (before the answering side
hangs up).
HW is 2.0.1(4e16) and firmware 3.1.7(GWg)
----- Original Message -----
From: "Paul Dugas" <[EMAIL PROTECTED]>
To: <Asterisk-Users@lists.digium.com>
Sent: Thursday, May 18, 2006 05:20
Subject: [Asterisk-Users] [OT] Disconnect Tone in US
I have a SPA-3000 that is failing to hanging up pretty often; almost
every day now. The weird thing is that an almost identically configured
(same FW, different HW rev) second unit right next to it isn't having
the same problem. Swap the lines and the problem stays with the unit.
I've been going round and round with Sipura and their latest message
told me to use a procedure detailed in a Voxilla posting [1] to measure
the disconnect tone and ensure the configs match.
This seems totally off base to me but I figure I'd ask. Anybody care to
comment? Do disconnect tones vary wildly in the US? Do they vary
between two lines from the same telco switch?
Paul
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
