Try to load module manually: modprobe wcfxo; ztcfg -vvvv srsergio
-----Mensaje original----- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] En nombre de Cameron Palmer Enviado el: viernes, 31 de octubre de 2003 6:27 Para: [EMAIL PROTECTED] Asunto: [Asterisk-Users] 2 X100Ps give error I have two X100Ps in my zaptel.conf and have it configured: fxsks=1-2 When starting rc.zaptel I get the error: Loading zaptel framework... Loading zaptel hardware modules: wcfxo wcusb Running ztcfg... ZT_CHANCONFIG failed on channel 2: No such device or address (6) As far as I can tell from the archived mailing lists I shouldn't have this problem. I do notice a difference in lspci which concerns me: 00:0d.0 Communication controller: Tiger Jet Network Inc. Intel 537 00:0e.0 Serial controller: Tiger Jet Network Inc. Intel 537 Why is one listed as a Communication controller and the other a serial controller? What I'm trying to do... I have activated the second line option and put it into a call hunt with the first line on my Vonage account. At the office I have a Konexx DWI connecting my Nortel phone to my desktop running RedHat and a X100P. My goal is seamless (as far as my boss in Santa Cruz can tell) connectivity between home and office but maintaining a low ongoing cost. Namely about $60 per month. Other details... The home setup - 2 7960G SIP phones 1 ATA-186 Linux (slackware 9.1) 2.4.22 on PIII 650MHz Connected to Vonage over the POTS. 2 X100P FXO Cards The office setup - Dell Precision 650 Redhat 9 1 X100P FXO Card Konexx DWI connected to Nortel phone _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
