> Hi,
>
>> -----Original Message-----
>> >The portion of extensions.conf is:
>> >exten => 3001,1,Dial(MGCP/aaln1,20)
>>
>> exten => 3001,1,Dial(MGCP/aaln/[EMAIL PROTECTED],20)
>
> Or aaln/1@<ip> should do just fine. However this doesn't explain why there
> is no dialtone on the phone..
>
> Oh, one thought: Did you set your toneconfiguration to Europe or US ? If
> you
> choose custom you need to configure it another way...
>
> Florian
>
Update:
I changed the tone config to USA to match Asterisk. No change. I did
notice that when I booted up everythign tonight that the MGCP SHOW
ENDPOINTS now shows:
Gateway 'ip10' at 0.0.0.0 (Dynamic)
-- 'aaln/[EMAIL PROTECTED] in 'from-sip' is idle
In the messages at start up there is:
== Registered channel type 'MGCP' (Media Gateway Control Protocol (MGCP))
-- MGCP Auditing endpoint aaln/[EMAIL PROTECTED] for hookstate
[chan_iax2.so]NOTICE[163851]: File chan_mgcp.c, Line 1099
(find_subchannel): Gateway '192.168.0.5' (and thus its endpoint 'aaln/1')
does not exist
-- Setting hookstate of aaln/[EMAIL PROTECTED] to ONHOOK
MGCP DEBUG shows the below lines repeating every couple of seconds:
from 192.168.0.5:2427MGCP read:
RSIP 1375 aaln/[EMAIL PROTECTED] MGCP 1.0 NCS 1.0
RM: restart
from 192.168.0.5:2427Verb: 'RSIP', Identifier: '1375', Endpoint:
'aaln/[EMAIL PROTECTED]', Version: 'MGCP 1.0'
2 headers, 0 lines
Still no dialtone and not able to send or receive calls.
Evidently there is a problem finding the phone. I can ping it from the
Asterisk server so isn't a raw IP issue. On the phone there is the
message "Waiting for call manager"
Additional ideas are appreciated. Will keep plugging away at it.
Robert
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
