I have followed these two for configuration of sangoma A101 http://www.ss7box.com/s01_setup.html http://www.ss7box.com/support_wancfg_1.html
on my side "wanrouter star/restart" is working fine when i am tring to "ztcfg -vvv" i am getting and when i am tring to load asterisk getting error "No such device or address" since two days i am tring to search on google but found nothin ------------------/etc/asterisk/zapata.conf [channels] context = default switchtype = Euroisdn usecallerid = yes echocancel = yes echocancelwhenbridged = yes rxgain = 0.0 txgain = 0.0 signalling = pri_cpe group =1 channel = 1-15,17-31 ------------------/etc/zaptel.conf loadzone = uk defaultzone = uk #span definitions span = 1,1,0,ccs,hdb3,crc4,yellow #channel definitions bchan = 1-15,17-31 dchan = 16 ------------------------------ # ls /proc/zaptel/ nothing ------------------------------- # ls /dev/zap/ channel ctl pseudo timer ------------------------------------- ----------------asterisk orror on Load------------------------ Jun 4 13:53:02 WARNING[12317]: chan_zap.c:923 zt_open: Unable to specify channel 1: No such device or address Jun 4 13:53:02 ERROR[12317]: chan_zap.c:6883 mkintf: Unable to open channel 1: No such device or address here = 0, tmp->channel = 1, channel = 1 Jun 4 13:53:02 ERROR[12317]: chan_zap.c:10319 setup_zap: Unable to register channel '1-15' Jun 4 13:53:02 WARNING[12317]: loader.c:414 __load_resource: chan_zap.so: load_module failed, returning -1 Jun 4 13:53:02 WARNING[12317]: loader.c:554 load_modules: Loading module chan_zap.so failed! ----------------------------------------------- -----------------"ztcfg -vvv"------------------------------ Zaptel Configuration ====================== SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: Clear channel (Default) (Slaves: 01) Channel 02: Clear channel (Default) (Slaves: 02) Channel 03: Clear channel (Default) (Slaves: 03) Channel 04: Clear channel (Default) (Slaves: 04) Channel 05: Clear channel (Default) (Slaves: 05) Channel 06: Clear channel (Default) (Slaves: 06) Channel 07: Clear channel (Default) (Slaves: 07) Channel 08: Clear channel (Default) (Slaves: 08) Channel 09: Clear channel (Default) (Slaves: 09) Channel 10: Clear channel (Default) (Slaves: 10) Channel 11: Clear channel (Default) (Slaves: 11) Channel 12: Clear channel (Default) (Slaves: 12) Channel 13: Clear channel (Default) (Slaves: 13) Channel 14: Clear channel (Default) (Slaves: 14) Channel 15: Clear channel (Default) (Slaves: 15) Channel 16: D-channel (Default) (Slaves: 16) Channel 17: Clear channel (Default) (Slaves: 17) Channel 18: Clear channel (Default) (Slaves: 18) Channel 19: Clear channel (Default) (Slaves: 19) Channel 20: Clear channel (Default) (Slaves: 20) Channel 21: Clear channel (Default) (Slaves: 21) Channel 22: Clear channel (Default) (Slaves: 22) Channel 23: Clear channel (Default) (Slaves: 23) Channel 24: Clear channel (Default) (Slaves: 24) Channel 25: Clear channel (Default) (Slaves: 25) Channel 26: Clear channel (Default) (Slaves: 26) Channel 27: Clear channel (Default) (Slaves: 27) Channel 28: Clear channel (Default) (Slaves: 28) Channel 29: Clear channel (Default) (Slaves: 29) Channel 30: Clear channel (Default) (Slaves: 30) Channel 31: Clear channel (Default) (Slaves: 31) 31 channels configured. ZT_SPANCONFIG failed on span 1: No such device or address (6) ------------wanrouter status-------------------------- # wanrouter status Devices currently active: wanpipe1 Wanpipe Config: Device name | Protocol Map | Adapter | IRQ | Slot/IO | If's | CLK | Baud rate | wanpipe1 | N/A | A101/2 | 11 | 1 | 1 | EXT | 0 | Wanrouter Status: Device name | Protocol | Station | Status | wanpipe1 | AFT HDLC | N/A | Disconnected | > > Im trying to install and configure sangoma ... > every thing is OK but when type the command > "wanrouter > start" the following error apears: > wan Driver not found. > > Thanks for any help > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users