Thanks mate. All going well. Regards,
Sahil Gupta VoiceValley On Tue, 6 Jun 2006, Boris Bakchiev wrote:
Samsung PABX? Its TEPRI probably configured in overlap mode so you need to configure asterisk span that is connected to PABX to overlap mode as well. When user selects the outside line in overlap mode PABX connects to asterisk and then sends the digits to it as the user presses the key's. If overlap mode is not configured in asterisk switch is not started by asterisk and it just thinks that empty dial string was sent to it. Just use: overlapdial=yes in your zapata.conf Make sure you have exten => s,1,Busy() exten => s,2,Hangup in your 'samsungincoming' context so that users get a busy signal when they didn't enter any digits in allotted time otherwise you'll get a hanging channel in Samsung. We use that setup with OfficeServ 500 and it works really well. Regards -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sahil Gupta Sent: Tuesday, 6 June 2006 21:40 To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] PABX Setup Hi, We are trying to port over a PABX to our network. Both PRI's seem to be live however, whenever someone dials out from the PABX Asterisk happens to report : -- Extension '' in context 'samsungincoming' from '736327438' does not exist. Rejecting call on channel 0/31, span 2 If crc4 is turned off, it reports a yellow alarm. Any suggestions? Regards, Sahil Gupta VoiceValley _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
