----- Matt Florell <[EMAIL PROTECTED]> wrote: > fixed within a couple weeks and the Digium side being fixed by having > to manually disable the hardware DTMF detection in the wct4xxp.c > driver code every time I upgrade zaptel.
This is no longer needed (editing the source); there is a module parameter that can be used to control this functionality as well, so you can place it into /etc/modprobe.d/matts-power-rules and it will take effect on each module load :-) > Is has a configurable tail length and is capable of dynamically being > turned on and off as needed by it's firmware. The Digium card uses an > Oki chipset that has a smaller echo tail length and is hard-coded > into > the firmware so you cannot change it. Small correction: the first generation VPM chips were manufactured by Oki, the current ones are manufactured at another facility... but neither of those companies designed them. -- Kevin P. Fleming Senior Software Engineer Digium, Inc. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users