I'm trying out a Linksys PAP2T-NA. Calling out works great, no problems there. Calling in, though, the phone doesn't ring. Caller ID shows up, I can pick up the phone, and the call is connected, but no ring. I've tried it on two analog phones, same behavior. Suggestions?
I don't know if the T version is different. On a PAP2, in Advanced View, Regional tab, you can tweak Ring Frequency (default 25, try 20 and 30), Ring Voltage (default 70, try 90) and Ring Waveform (default Sinusoid, try Trapezoid). Also, assuming you're not using distinctive ring, make sure Ring 1 Cadence is 60(2/4) or something reasonable. If still no luck, you may have a bad SLIC; try the other port. If all else fails, use a scope to see what ringing voltage, if any, is present. It's hard to believe that this could be a * problem. --Stewart _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users