[channels] language=en #include zapata_additional.conf context=from-zaptel signalling=fxs_ks faxdetect=incoming usecallerid=asreceived echocancel=yes callprogress=no busydetect=no echocancelwhenbridged=no echotraining=800 group=0 channel=>1
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tom Vile Sent: Friday, June 09, 2006 11:53 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] No CID on ZAP Thanks for sharing that info. How about sharing your zapata.conf configuration so that someone can look at it and maybe see if there is a problem. I'm guessing you want help with this. On 6/9/06, Curt Shaffer <[EMAIL PROTECTED]> wrote: > > > > > I am using asterisk version 1.2.6 with Zaptel version 1.2.5. I have a POTs > line coming into a Digium TDM01B. It appears to not be getting CID at all. > If I hook up a POTS phone to the line CID comes through fine. Inbound and > outbound calls work fine but there is just no CID on inbound for this > channel.The incoming route for the channel is Zaptel Channel 0. No DID or > CID settings applied. My IP routes inbound are providing CID with no issue. > > > > > > Here is the output from the log when a call is coming in: > > > > -- Starting simple switch on 'Zap/1-1' > > -- Executing NoOp("Zap/1-1", "Entering from-zaptel with DID == ") in new > stack > > -- Executing Set("Zap/1-1", "DID=s") in new stack > > -- Executing NoOp("Zap/1-1", "DID is now s") in new stack > > -- Executing GotoIf("Zap/1-1", "1?zapok:notzap") in new stack > > -- Goto (from-zaptel,s,7) > > -- Executing NoOp("Zap/1-1", "Is a Zaptel Channel") in new stack > > -- Executing Set("Zap/1-1", "CHAN=1-1") in new stack > > -- Executing Set("Zap/1-1", "CHAN=1") in new stack > > -- Executing Macro("Zap/1-1", "from-zaptel-1|s|1") in new stack > > -- Executing NoOp("Zap/1-1", "Returned from Macro from-zaptel-1") in new > stack > > -- Executing Goto("Zap/1-1", "ext-did|s|1") in new stack > > -- Goto (ext-did,s,1) > > -- Executing Set("Zap/1-1", "FROM_DID=s") in new stack > > -- Executing Goto("Zap/1-1", "ext-local|200|1") in new stack > > -- Goto (ext-local,200,1) > > -- Executing Macro("Zap/1-1", "exten-vm|200|200") in new stack > > -- Executing Macro("Zap/1-1", "user-callerid") in new stack > > -- Executing GotoIf("Zap/1-1", "0?report") in new stack > > -- Executing GotoIf("Zap/1-1", "0?start") in new stack > > -- Executing Set("Zap/1-1", "REALCALLERIDNUM=") in new stack > > -- Executing NoOp("Zap/1-1", "REALCALLERIDNUM is ") in new stack > > -- Executing Set("Zap/1-1", "AMPUSER=") in new stack > > -- Executing Set("Zap/1-1", "AMPUSERCIDNAME=") in new stack > > -- Executing GotoIf("Zap/1-1", "1?report") in new stack > > -- Goto (macro-user-callerid,s,9) > > -- Executing NoOp("Zap/1-1", "Using CallerID "" <>") in new stack > > -- Executing Set("Zap/1-1", "FROMCONTEXT=exten-vm") in new stack > > -- Executing Set("Zap/1-1", "VMBOX=200") in new stack > > -- Executing Set("Zap/1-1", "EXTTOCALL=200") in new stack > > -- Executing Set("Zap/1-1", "CFUEXT=") in new stack > > -- Executing Set("Zap/1-1", "RT=25") in new stack > > -- Executing Macro("Zap/1-1", "record-enable|200|IN") in new stack > > -- Executing GotoIf("Zap/1-1", "0 > 0?2:4") in new stack > > -- Goto (macro-record-enable,s,4) > > -- Executing AGI("Zap/1-1", > "recordingcheck|20060609-095557|1149864957.408") in new > stack > > -- Launched AGI Script > /var/lib/asterisk/agi-bin/recordingcheck > > recordingcheck|20060609-095557|1149864957.408: Inbound > recording not enabled > > -- AGI Script recordingcheck completed, returning 0 > > -- Executing NoOp("Zap/1-1", "No recording needed") in new stack > > -- Executing GotoIf("Zap/1-1", "0?dolocaldial|1") in new stack > > -- Executing Macro("Zap/1-1", "dial|25|tr|200") in new stack > > -- Executing AGI("Zap/1-1", "dialparties.agi") in new stack > > -- Launched AGI Script > /var/lib/asterisk/agi-bin/dialparties.agi > > dialparties.agi: Starting New Dialparties.agi > > -- dialparties.agi: priority is 1 dialparties.agi: Caller ID name is > 'unknown' number is 'unknown' > > dialparties.agi: Methodology of ring is 'none' > > -- dialparties.agi: Added extension 200 to extension map > > -- dialparties.agi: Extension 200 cf is disabled > > -- dialparties.agi: Extension 200 do not disturb is disabled > > == Parsing '/etc/asterisk/manager.conf': Found > > == Manager 'admin' logged on from 127.0.0.1 > > == Manager 'admin' logged off from 127.0.0.1 > > -- dialparties.agi: Checking CW and CFB status for extension 200 > > -- dialparties.agi: DbSet CALLTRACE/200 to unknown > > -- AGI Script dialparties.agi completed, returning 0 > > -- Executing Dial("Zap/1-1", "SIP/200|25|tr") in new stack > > > > Any help would be appreciated. > > > > > > > > Thanks > > > > Curt > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > -- Tom Vile Baldwin Technology Solutions, Inc Consulting - Web Design - VoIP Telephony www.baldwintechsolutions.com Phone: 518-631-2855 x205 Fax: 518-631-2856 _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users