Hello, I am trying to use 2 netjet cards under asterisk and isdn4linux. I am having a hard time trying to get them to work in terms of dial out. Does anyone have a working config I could look at for even one card (tried that, not much luck either).
When i dial out: -- Accepting AUTHENTICATED call from 172.16.11.2, requested format = 2, actual format = 2 -- Executing Dial("[EMAIL PROTECTED]:5036]/2", "modem/g1/v{EXTEN:1}") in new stack -- Called g1/v{EXTEN:1} -- Modem[i4l]/ttyI0 is busy -- Hungup 'Modem[i4l]/ttyI0' == Everyone is busy at this time -- Executing Congestion("[EMAIL PROTECTED]:5036]/2", "") in new stack == Spawn extension (international, 90412463080, 2) exited non-zero on '[EMAIL PROTECTED]:5036]/2' -- Hungup '[EMAIL PROTECTED]:5036]/2' -- Registered 'menger' (AUTHENTICATED) at 172.16.11.2:5036 I am using devices /dev/ttyI0 for the first card and ttyI1 for the second card. I have loaded the module up using: modprobe hisax type=20,20 protocol=2,2 id="HiSax" I am running RedHat Linux 9.0 wth latest kernel from redhat. Any help apart from buy a capi card would be most appreciated. Thanks, Matthew Enger [EMAIL PROTECTED] -- Matthew Enger <[EMAIL PROTECTED]> Xintegration _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users