Pete, Thanks for the reply! If you don't mind I would love to take a look at the script I am sure it will be great help.
Thanks, Issac -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Peter Doyle Sent: Saturday, June 10, 2006 5:16 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] FXO registration and VegaStream Hi Isaac, I am a newbie to Asterisk (hoping to set up a system for my office) and I have been struggling with the Vega 5010 (10 FXO) as well. I've had the same problem as you, being able to call out, but not receive calls. I just found a solution (for my setup atleast). First off, I have the Vega set up according to some very basic instructions from this list (for a different Vega) and from the getting started setup guide from the Vegastream CD. I have "enable registration" set (under SIP options in the Vega's web config), which makes the Vega register with Asterisk. I am currently testing with only one line coming into port 1, which has an "Authentication Number" (see PSTN options in Vega's web config) of 01 and a "Interface Number" of 06. Basically, the vega registers with username 01, but sends the call to asterisk with [EMAIL PROTECTED]'s ip here} as the address. When I'd do a "sip debug" during an incoming call, I'd see asterisk responding with a "SIP/2.0 404 Not Found" error, causing the vega to answer and immediately hang up. I figured asterisk was looking for SIP user 06, so I added it, but I still got 404's. Turns out I just needed an EXTENSION, 06. I can now make calls and receive them, too. Of course, if you have multiple incoming lines, you'd need extension 06, 07, 08 ... etc, since each port has its own "Interface Number" (by default), to allow routing of calls made to different lines. I hope that helps some. If not, I can send my complete configs, although I'm sure there's some other problems with them. Now, if only I could get rid of the echo, I'd be a happy man! Pete Doyle -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Issac Simchayof Sent: Friday, June 09, 2006 7:10 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] FXO registration and VegaStream I am trying to configure a VegaStream 50 FXO to work with asterisk. The problem that I am having is that the VegaStream does not support incoming registration from asterisk. VegaStream only allows outbound registration. My question is does asterisk allow incoming registration from an FXO? If yes how? Or better yet, has anybody been able to make the VegaStream FXO work with asterisk? According to VegaStream they have many clients using this combo but they haven't been very helpful otherwise. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
