In zapata.conf I have, among other things: ; Incoming only group=0 ; Zap/g0 signalling=pri_cpe context=from-pstn channel => 1-10 ; Outgoing (only?) group=1 ; Zap/g1 channel => 11-15,17-21 ; To/From Alcatel group=2 ; Zap/g2 signalling=pri_net context=from-alcatel channel => 32-46,48-62
Then in extensions.conf I have: [from-pstn] include => ext-did include => from-pstn-timecheck ; this has to be included otherwise it overrides ext-did [ext-did] ; My DID has 3 numbers (scrambled to protect innocents): 987654ZXX exten => _987654ZXX,1,Set(FROM_DID=_984899ZXX) exten => _987654ZXX,2,Set(NumberCalled=${EXTEN:6}) exten => _987654ZXX,3,Goto(custom-ext-did,${EXTEN:6},1) [custom-ext-did] ; use only 'include' here!!! include => ext-local ; change trunk number below if trunks order changes!!! include => outrt-003-alcatel [from-pstn-timecheck] ... (if incoming call doesn't match DID then do whatever you like...) ... [outrt-003-alcatel] ; trunk '3' is Zap/g2 (To/From Alcatel) exten => _ZXX,1,Macro(dialout-trunk,3,${EXTEN},) exten => _ZXX,2,Macro(outisbusy) ; No available circuits [from-alcatel] ; allow Alcatel phones to call Asterisk extensions include => ext-local ; allow Alcatel phones to call PSTN numbers include => from-alcatel-ext exten => s,1,Macro(hangupcall) exten => h,1,Macro(hangupcall) [from-alcatel-ext] exten => _X.,1,SetTransferCapability(SPEECH) ; trunk '2' is Zap/g1 (outgoing) exten => _X.,n,Macro(dialout-trunk,2,${EXTEN},) exten => _X.,n,Macro(outisbusy) That's all (more or less) Please send me a beer if it works for you! Bye from Italy M. > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Nathan Bell > Sent: Monday, June 12, 2006 6:41 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] T1 passthrough/middleman > > That sounds exactly like what I want to do. I've don't have a > PRI line (although I'm going to press for getting one soon), > but for now I would just like a couple of pointers in getting > Asterisk's dial plan set up to just pass the calls from one > T1 to another. > > Thanks a million in advance. > > Mimmus wrote: > > >I used this approach to gradually migrate from a legacy Alcatel PBX: > > PSTN E1 PRI --- Asterisk --- Crossed E1 cable --- Alcatel PBX At > >first, Asterisk did nothing, only passing calls to/from Alcatel. > >Then I started to use a bunch of SIP phones directly > connected to Asterisk. > >Now I have the great part of extensions as SIP phones and > the old PBX > >is working as a channel bank only for a few of analog devices. > > > >Configuring the dialplan to do this dirty job is not > difficult but now > >I'm not able to help you because it's saturday evening and > I'm at home! > >Re-try next Monday. > > > >DV > > > > > > > > > >>-----Original Message----- > >>From: [EMAIL PROTECTED] > >>[mailto:[EMAIL PROTECTED] On Behalf > Of Nathan > >>Bell > >>Sent: Friday, June 09, 2006 10:34 PM > >>To: Asterisk Users Mailing List - Non-Commercial Discussion > >>Subject: [Asterisk-Users] T1 passthrough/middleman > >> > >>Is it possible to act as a middle man on a T1 line? > >> > >>My installation currently has an aging Inter-Tel Axxess box > with a T1 > >>coming in (16 in, 8 out). Rather than adding and replacing > phones and > >>cards as they die, I would like to slowly migrate to a asterisk SIP > >>installation. > >> > >>I want to take the incoming T1 line, use any available > outgoing lines > >>for outgoing SIP, intercept any incoming lines and either send them > >>off to a SIP line or pass them through to other T1 line > (going to the > >>Axxess box), and finally take in outgoing calls from the > Inter-Tel box > >>and either send them to SIP or send them to the outside T1 line. > >> > >>How will a dual T1 card be set up in this situation? Would it be > >>easier to use an FXO channel bank (or card) and connect > analog lines > >>to the FXS analog lines on the Inter-Tel box? > >>_______________________________________________ > >>--Bandwidth and Colocation provided by Easynews.com -- > >> > >>Asterisk-Users mailing list > >>To UNSUBSCRIBE or update options visit: > >> http://lists.digium.com/mailman/listinfo/asterisk-users > >> > >> > >> > > > >_______________________________________________ > >--Bandwidth and Colocation provided by Easynews.com -- > > > >Asterisk-Users mailing list > >To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users